Sands & Aggregates

PaveSand™ is a specially dried, formulated sand product applied to the surface of the paving. It flows into joints and, when fully compacted, ensures lock-up and load transfer critical to...

PaveLock® pave bonding sand is a stabilising jointing sand that enhances the durability and appearance of paved surfaces. The combination of correctly graded sands and additives in PaveLock® form a...

Plaster Sand is a blend of No.1 river sand and a scientifically graded fine sand which contains the absolute minimum of salts. It is formulated specifically for plaster and mortar mixes.

It is generally used in commercial filtration. In general it has a top particle size of 2.36mm and a bottom particle size of 0.6mm with an average size of 1.18mm.

A blend of 14mm chip and No. 1 river sand which contains the absolute minimum of salts. Builders Mix is ideal for mixing with cement for small concreting jobs around...

Playground sand is certified to meet NZ 5828:2004 (BSEN 1177:1988 Impact Absorbing Playground Surfacing - Safety requirements and test methods). It is designed for use in playground areas.

East Coast Sand is an east coast dune sand and is often referred to as Bricklayers Sand. It contains the absolute minimum of salts. It is ideal for mortar mixes.

Builders Sand is a general purpose No.1 river sand which contains the absolute minimum of salts. It is ideal for use as a concrete sand, for basic mortars, children’s sand...

Foundry Sand is a white sand suitable for foundry moulding, stone mason work and as a raw material for fine plastering, grouting and paints.

Scoria 25/7 is a graded scoria suitable for infill, drainage and landscaping purposes. Size range is between 7 – 25mm.

SAP7 is a fine grade of scoria suitable for infill, drainage and landscaping purposes. Size range is less than 7mm.