standard pumped

Standard pumped

Firth provides a range of solutions for delivery of ready mix concrete to sites where access is difficult or elevation is required. These include standard mix designs for pumping applications, or specifically formulated mixes to meet your particular needs.

Please note that not all aggregate/pebble mixes are pumpable (e.g. structural mix or aggregate mixes with no fines). Talk to your local Firth representative for more details on product suitability. 

Technical information

Strength grade– 20 MPa to 50MPa (Higher strength can be achieved on request)

Slump – typically 120-140mm

Compliance –NZS3104, independently audited by Concrete NZ

Suitable for Paths, Courtyards, Floors, Driveways, Foundations, Patios
Aggregates

Aggregates

A range of aggregate sizes (10mm, 13mm and 19mm) and strengths (20MPa to 50MPa) are available; depending on the pump type and the intended use of the concrete.

pump guy

Concrete Pumps

Grout Pumps (7-10mm aggregate): Grout pumps are suitable for 7-10mm aggregate. Grout pumps are mainly used for grout/block fill work. 

Line Pumps (13-19mm aggregate): Line pumps are suitable for 13-19mm aggregate. Line pumps are used for larger quantities of concrete - usually over two truckloads. They are capable of pumping aggregate, pebble mix, Flowable Fill™ and spray mix. 

Boom Pumps (13-19mm aggregate): Boom pumps are suitable for 13-19mm aggregate. Boom pumps are capable of pumping aggregate, pebble mix and Flowable Fill™ and some have booms which can reach up to 37 metres long.

truck bowl22

Contact us

0800 CONCRETE

FAQs

0800 CONCRETE (0800 2662 7883) is our dedicated line for concrete orders through the country.

  • 6 wheelers = 5m3
  • 8 wheelers = 6.4m3
  • 10 wheelers = 7m3

3m3

Between 9m — 12m long (2.8m — 3m wide).

3.6m in height.

  • Small pump 26m reach 
  • Medium 28m reach
  • Large 37m reach

No, see the Firth website for our full Elements colour range. Any other colour oxides you supply can be added to the mixing bowl onsite.

Most plants up to 100m3 an hour depending on mix design.

Yes, our plant managers can carry out any site checks required for truck access (when given a few days' notice).

Anything that's 1 hour or more out of zone.

  • For DIY/homeowners we have an online order and estimation service, click here to access.
  • All commercial queries, please email info@firth.co.nz

No, you will need to engage a contractor or DIY to do this. We can supply some recommended contractors in some regions — email info@firth.co.nz for a list of local contractors.